Instructions Hot! — Bonavita Sheffield Lifestyle Crib

Secure each corner of the spring to the side panels using the medium bolts and washers. Tighten these bolts completely to keep the spring level. Step 3: Attach the Front Gate Position the front gate between the two side panels.

Give the crib a gentle shake to ensure it feels rigid, sturdy, and stable. 📈 Mattress Height Adjustment Guide

Align the left side panel with the left edge of the back panel.

Remove the front panel of the crib entirely. Keep the mattress support spring on its lowest setting. Bolt the toddler guard rail into the open space left by the front panel using the original hardware pathways. 2. Daybed Conversion bonavita sheffield lifestyle crib instructions

Insert the support brackets into the pre-drilled holes at your chosen height. Lower the metal or wood mattress support onto the brackets.

Insert barrel nuts into the pre-drilled holes on the inside of the back panel if required by your specific model variation.

Days turned into weeks. Neighbors started to notice the little crib through the window, a statement of quiet joy on Lena's porch. People would stop to admire the craftsmanship, to ask where she'd found it. She always said the same thing: "I found it where things lose their stories." Secure each corner of the spring to the

Open all boxes, laying components on a soft, carpeted surface to avoid scratching the wood finish.

Ensure you have all the original bolts, barrel nuts, and the Allen wrench. If parts are missing, do not substitute them with generic hardware from a home improvement store, as these may not meet the specific tension requirements for a crib.

Are there any on the bottom rail of your headboard? Give the crib a gentle shake to ensure

Tighten securely using a Phillips head screwdriver or Allen key, depending on your hardware type. Step 4: Final Tightening Inspection

Bolt the four brackets securely into the designated inner holes of the side panels.

Go around the entire crib with your Allen wrench and tighten every bolt. The joints should be completely flush with no visible gaps.

The mattress must be full-size (at least 27 1/4 inches by 51 5/8 inches). There should be no gap larger than two fingers between the mattress and the crib sides to prevent entrapment.

However, because Bonavita (formerly a division of LaJobi) is no longer actively manufacturing new furniture, finding the original instruction manual can be a challenge.