The Autokent Patched Driver is a modified version of the Xhorse driver. It allows the 32-bit hardware communication to operate correctly within a 64-bit environment, specifically allowing the XHorse MVCI Driver for Toyota TIS to register properly. Why You Need the Patched Version
Enables popular mods like disabling seatbelt chimes, changing door lock settings, and adjusting light behavior. Prerequisites Before Installation To ensure a smooth setup, you will need the following: MINI-VCI Cable : Usually blue, often labeled " MINI-VCI J2534
: Verified to work on modern systems, including Windows 11 64-bit , for tasks like reading diagnostic codes and programming new keys.
Q: How do I use the Autokent MVCI Multi Driver x64 Patched? A: The software requires a basic understanding of automotive diagnostics and programming. Users should follow proper safety precautions and best practices to avoid damaging the vehicle or the software.
This happens if Windows overwrites the modified FTDI drivers with a standard Windows update driver. autokent mvci multi driver x64 patched
Windows 10 and 11 block modified drivers by default. You must temporarily disable this security feature.
Use at your own risk. For learning purposes only. Support the original developers when possible.
If you are running Windows 10 or 11 (64-bit), you have likely encountered the infamous "MVCI_MultiX64.exe" error or the failure of to recognize the cable. The solution is the Autokent MVCI MultiDriver x64 Patched driver.
Navigate to > Advanced options > Startup Settings > Restart . The Autokent Patched Driver is a modified version
When working with modified vehicle communication drivers, keeping your workspace stable is essential for preventing module damage.
When users attempt to install these legacy drivers on modern 64-bit systems, the installation fails or causes application crashes. The "x64 Patched" version resolves this core issue. It modifies the underlying dynamic link libraries (DLLs) and system registry pointers. This modification allows standard J2534 pass-thru hardware to communicate with modern 64-bit architecture. Supported Diagnostic Software Programs
Go to Device Manager > Universal Serial Bus controllers > USB Root Hub > Properties > Power Management. Uncheck "Allow the computer to turn off this device to save power." Safety and Risks
Works with various clones and versions of the MVCI cable (Firmware 1.4.1, 1.4.8, and 2.0.4). Prerequisites Before Installation To ensure a smooth setup,
Windows 10/11 might block the driver. You may need to disable Driver Signature Enforcement in the Windows Advanced Startup Options.
Copy all the extracted files from C:\temp\mvci into C:\Program Files (x86)\XHorse Electronics\MVCI Driver for TOYOTA TIS . Phase 3: Installing the Driver in Device Manager Plug your MINI VCI cable into your computer's USB port. Open (right-click Start > Device Manager).
Confirm that the device is recognized as a USB Serial Converter and a USB Serial Port without any yellow warning triangles. Common Troubleshooting Steps
Users report that while reading diagnostic trouble codes and sensor data often works, complex operations like programming and calibrations may fail. One Saab owner using Tech2Win with the Autokent driver reported: “I was able to read status info (even from the ECU), but any kind of programming or calibration failed.” Similarly, ForScan users have found that the Autokent MVCI driver appears in the system but does not actually work properly with their adapters.