Supports drives up to 40TB total (20TB per bay).
: USB 3.0 SuperSpeed (Backwards compatible with USB 2.0 and 1.1)
: Slot the two main side panels into the base plate until they click into place. Middle Shelves
Verify that the drive in has a raw storage volume capacity equal to or larger than the drive in Bay A . The drives are getting very warm during operation.
Connect the specialized external DC adapter to the wall and insert the barrel plug into the rear dock port. unitek yst03004 manual verified
Unitek Y-ST03004 is a dual-bay USB 3.0 to SATA docking station designed for high-speed data transfer and standalone offline cloning. This guide summarizes the verified technical specifications and operational instructions based on the manufacturer’s manual and official product documentation. Product Overview Unitek Y-ST03004
In this mode, the UNITEK Y-ST03004 acts as a high-speed dual-bay external drive reader.
The target drive (Bay B) must have a capacity equal to or larger than the source drive (Bay A). All data on the target drive will be permanently erased during this process.
Slide the storage drive vertically downward into the bay slot until fully seated. Step 2: System Hookup Supports drives up to 40TB total (20TB per bay)
: Snap the controller holders and headset hooks into the side slots of the main panels. Drawer/Base
Navigate to .
: Enables standalone drive duplication (copying Source Disk A to Target Disk B) without needing to connect to a computer.
The Unitek YST03004 manual provides detailed instructions on how to: The drives are getting very warm during operation
For any additional support needs, you can contact the manufacturer at support@unitek-products.com.
Plug your keyboard, mouse, or flash drive into the 4 USB-A ports on the front.
Press the selector button on top to toggle control between Computer 1 and Computer 2.
Disclaimer: This article is based on information from the manufacturer's product pages and verified, reliable sources regarding the 4 Ports Powered USB 3.0 Hub (YST03004 series). 4 Ports Powered USB 3.0 Hub with USB-A Cable - UNITEK