Autocraft Battery Charger Ac-60cr Manual

Turn off the charger and wiggle the clamps to bite into the metal post. Tripped circuit breaker

When the needle stabilizes at a very low level (usually around 1 to 3 amps in maintenance mode), the battery is fully charged.

Charging a Battery Inside the Vehicle (Negative Grounded Only)

Sites like , ManualShelf , or ManualsOnline sometimes host older or rebranded manuals. Search “AC-60CR” there. autocraft battery charger ac-60cr manual

: Compatible with both 6V and 12V systems, selectable via a front-panel switch.

Connect the charger plug only to a properly grounded three-prong outlet. Do not use adapter plugs or extension cords unless absolutely necessary. 2. Technical Specifications & Features

Set all charger switches to the OFF position. Turn off the charger and wiggle the clamps

Ensure the charger clamps have a clean, solid connection to the terminals. The battery may be too depleted to accept a charge.

Switches from full-power charging to float mode automatically when the battery is charged.

: Used for long-term maintenance or charging small batteries. 10A (Fast Charge) : For standard automotive battery recharging. 50A (Engine Start) Search “AC-60CR” there

The built-in ammeter gauges how much current is flowing into the battery:

Always wear complete eye protection and protective clothing when working near lead-acid batteries.

The Autocraft AC-60CR is a professional-grade battery charger that is part of Autocraft's lineup of automotive electrical equipment. As an industry brand known for battery chargers, Autocraft produces equipment to meet the requirements of various battery sizes and applications. This specific model, AC-60CR, has appeared in industrial auctions, highlighting its role as a durable piece of equipment used in professional settings, such as tool and die shops.

Check battery terminals for corrosion. Clean with a wire brush or baking soda/water if necessary.

: Prevent electrical arcs by keeping the charger completely unplugged from the wall outlet until all clamp connections are firmly established. Step-by-Step Operating Instructions 1. Charging a Battery Inside the Vehicle