Firstchip Fc1178 Fc1179 Mptools V1052 Repack Jun 2026

To implement this in the v1052 Repack source or script:

October 2023 (Updated for legacy support) Target Audience: Hardware technicians, data recovery specialists, IT professionals

| Error Code | Message | Likely Cause | Fix | | :--- | :--- | :--- | :--- | | | Download ISP Fail | Voltage mismatch or bricked NAND | Short the two TEST pins on the PCB (Google: "FC1178 short pin method") | | 0x110 | Bad Block too many | The NAND is truly dying | Run "Erase All Block" in Setting → "Test Mode" . Reduce total capacity to 50% in Capacility Setting. | | 0x303 | Compare Flash ID Fail | The tool's DB lacks your exact NAND | Manually edit FlashDB.ini in the repack folder. Add NAND ID parameters from a working dump. | | Write Protect | N/A | FC1179 entered hardware lock | You cannot fix this with software. Requires JTAG/shorting. | | Time out | 0x217 | USB power saving | Disable "USB Selective Suspend" in Windows Power Options. |

The settings screen is where you will input the information gathered from ChipGenius. The exact layout can vary slightly between tool versions, but the core principles are the same. firstchip fc1178 fc1179 mptools v1052 repack

Right-click FirstChip_MPTool_V1052.exe and select Run as Administrator . 3. The Recovery Process

Intended for superficial modifications. They allow factories to change the visible vendor string (e.g., modifying the display name to "Kingston"), change serial numbers, or partition the drive into a simulated CD-ROM boot volume. They cannot fix raw firmware or NAND bad-sector errors.

The numbers FC1178 and FC1179 might refer to specific chip models, firmware versions, or product codes within FirstChip's lineup. Without specific context, it's challenging to provide a detailed explanation, but these could represent: To implement this in the v1052 Repack source

: Enhanced "open card" (initialization) yield for MLC (Multi-Level Cell) flash memory.

: If your drive was a "fake" (e.g., sold as 128GB but actually 32GB), the tool will likely restore it to its true, smaller capacity. specific USB Controller

inside Windows Disk Management.

The term v1052 likely refers to a software version, specifically version 10.52, of MPtools or a related software. A "repack" usually means that the software has been re-packaged, possibly for easier distribution, to include additional features, fixes, or to support additional hardware.

Correcting English localization files so settings panels don't break or crash the application when changing the language toggle.

By default, the tool may boot with a Chinese interface. Locate the block on the side panel or menu and toggle the checkbox to English . Add NAND ID parameters from a working dump

: If the tool fails to remove write protection, ensure you are using the "Low Level" scan mode in settings. Wrong Tool