If the charge exceeds 1.49kV, the meter automatically switches from low range to high range, moving the decimal point and altering the scale multiplier. Using the Hold Function
That’s the stability indicator . Green = stable reading. Red = fluctuating field. The manual suggests waiting for a green light before recording data.
: Depending on the complexity of the device, users may require training to operate it effectively and safely.
Simco-Ion recommends professional recalibration at least once every 12 months . Calibration must be performed using a precision voltage source and a parallel-plate calibration fixture to verify accuracy across both low and high ranges. simco fmx002 manual top
that shuts the device down after approximately five minutes of inactivity. 4. Maintenance and Troubleshooting
: A clear digital LCD display showing numerical values and color-coded bar graphs to indicate charge polarity.
Recalibrate the device once every 12 months. Calibration must be performed using a certified charging plate system to verify accuracy across both low and high voltage thresholds. If the charge exceeds 1
To help tailor this guide further, let me know if you need specific information on: The details How to use it for ionizer balance testing Where to source certified replacement parts Share public link
If you work in electronics manufacturing, printing, plastics, or any industry where electrostatic charge is the hidden enemy, you have likely heard of the . This handheld electrostatic fieldmeter is legendary for its reliability, ease of use, and accuracy.
Press the button. The digital display will reset to 0.00 . Taking Measurements Red = fluctuating field
An optional accessory is the ion balance plate for measuring the residual voltage of ionizers.
Data Hold FunctionIf you are measuring in a hard-to-reach area, press the "HOLD" button. This freezes the current reading on the screen, allowing you to pull the meter away and record the data. Maintenance and Calibration
If the sensor becomes dusty, use clean, dry compressed air to blow it out. Do not use solvents.
A: No – it is the same physical part. “Manual top” refers to the operational mode, not a different hardware SKU.