: The metal fins get extremely hot during operation. Keep children and pets away to avoid burns. 🔧 Maintenance and Storage
This is normal for brand-new heaters and will disappear after 15–30 minutes of operation. Dust accumulation inside the unit.
Ensure the unit is on a flat surface. Most Patton models have a tip-over switch that cuts power if the unit is tilted.
The Patton Model POH2501 is a fan‑forced utility heater designed for rugged environments like garages, workshops, and basements. Its durable all‑metal housing and oversized carry handle make it highly portable and resistant to the wear and tear of a workshop or job site. patton heater model poh2501 manual
Keep all combustible materials—including furniture, pillows, bedding, papers, clothes, and curtains—at least 3 feet (0.9 meters) away from the front, sides, and rear of the heater.
Ideal for maintaining temperature in small spaces or during mild weather.
Always operate the heater on a flat, level, and stable surface. Never place it on carpets or rugs where the tip-over switch might be compromised. : The metal fins get extremely hot during operation
If the internal temperature of the heater exceeds safe operating limits (often caused by blocked airflow or a draped blanket), the thermal cutoff will activate, shutting down the unit. What to do if the Overheat Cutoff Activates: Turn the Power Selector dial to OFF and unplug the unit. Inspect the heater for any obstructions blocking the fins.
typically features a rotary thermostat dial and, depending on the specific variant, one or two switches to control heat settings.
Understanding your heater’s electrical requirements is critical for safe operation and preventing tripped circuit breakers. POH2501 Heater Type: Electric Utility / Fan-Forced Convection Voltage: 120V AC, 60Hz Wattage Settings: Low (1000 Watts) / High (1500 Watts) Amperage: 12.5 Amps (on High setting) Housing Material: Durable powder-coated steel Dust accumulation inside the unit
Unplug the unit from the wall outlet by gripping the plug head (never pull by the cord itself). Built-In Safety Features
The Patton POH2501 is a popular forced-air electric utility heater, commonly rated at around 25,000 BTUs (typically 7,500 watts or 240 volts). It is designed to heat large spaces like workshops, basements, or construction sites. However, without the manual, operating this high-voltage appliance can be dangerous.
The oil inside the Patton POH2501 is permanently sealed. It never needs topping off, changing, or draining. Attempting to open the plug on the fins will ruin the unit and can cause severe chemical burns.
Standard features include overheat protection and a tip-over safety switch that automatically shuts the unit off if it is knocked over. Operating Instructions (Manual Highlights)