Check the WITTMANN Group website under "Service & Support > Downloads." Manuals are often available in multiple languages.
I can’t provide or link to copyrighted manuals or full scanned PDFs. I can, however, help by:
Turn off the main electrical supply only after the unit has cooled down. 5. Preventative Maintenance Schedule
| Problem | Possible Cause | Solution | |----------------------|--------------------------------|-----------------------------------------------| | | PID settings incorrect | Run auto-tuning or reset to default PID values. | | Unit not heating | Heater relay failure | Check relay for welding; replace if necessary. | | Low pressure alarm | Water supply interruption | Ensure water supply is open and pressure is adequate. | | Error code E-01 | Sensor break or short circuit | Check temperature sensor and wiring; replace sensor. | | Unit shuts down randomly | Overheating due to poor cooling | Clean the cooling water filter and heat exchanger. | | Pump not running | Motor overload tripped | Reset the overload relay; check for blockage. |
Shows real-time flow monitoring (crucial for detecting mold blockages). Wittmann Tempro Plus D 360 Manual
The Wittmann Tempro Plus D 360 is a temperature control device used for heating and cooling applications. It is designed to provide precise temperature control for medical and laboratory use.
Direct or indirect cooling options with high-efficiency heat exchangers.
The Tempro Plus D 360 is built with safety as a priority. It features automatic leakage and hose break monitoring that will immediately shut down the system to prevent damage or injury. The microprocessor also provides maximum temperature monitoring, shutting off the heater if an unsafe limit is reached. Wittmann has also focused on environmental impact. The new models, which are based on this technology, can vary pump speeds to reduce energy consumption by at least 45%. Additionally, the Tempro Plus line is being developed to operate on direct current (DC) to further improve energy efficiency.
Improperly shutting down the unit—such as disconnecting power while the heater is active—can cause premature heater failure. Check the WITTMANN Group website under "Service &
: Built-in air purging for quick mold changes and line evacuation. 🔗 Connectivity & Expansion
The Tempro Plus D 360 is a robust and powerful unit built for demanding production environments. Its specifications confirm it is a workhorse designed for continuous, heavy-duty use.
Ensure all water hoses (supply, return, mold inlet, mold outlet) are secured and leak-free. Power Supply:
Place the D 360 on a level, vibration-damped surface. Maintain a minimum clearance of 300 mm on the rear and left side for air intake. The ambient temperature must not exceed 45°C. | | Low pressure alarm | Water supply
Self-optimizing control, automatic filling with leakage monitoring, and advanced safety features. 2. Key Components and Specifications (Manual Highlights)
Ensure main contactors and terminal screws remain tight. Decalcification
: Standard units include automatic filling, pump rotation detection, dry-run protection, and a potential-free alarm contact.
The Tempro Plus D 360 is designed with longevity and reliability in mind.
The Tempro Plus D series prioritizes safety, essential for pressurized operation: