Keyence Gs-11pc Manual !new!
The GS-11PC is not a standalone device; it connects via a shielded cable to an amplifier. The manual will show:
If you’d like, I can:
To prevent premature wear, false trips, and tampering, follow these mechanical installation rules. Mounting Restrictions
An error or fault condition has occurred. Count the flashes to identify the fault code. 6. Maintenance and Troubleshooting Common Error Codes and Fixes LED Symptom Potential Cause Troubleshooting Steps No LED Lit Loss of power supply.
The GS-11PC uses a . The manual lists the following pin assignments (standard for most Keyence GS sensors): keyence gs-11pc manual
The Complete Guide to the Keyence GS-11PC Safety Interlock Switch
The switch is in an interlock state or waiting for a manual reset command.
The face of the GS-11PC features highly visible LED indicators to assist with alignment:
): 10 mm (The distance at which the switch is guaranteed to turn ON) Assured Releasing Distance ( Sarcap S sub a r The GS-11PC is not a standalone device; it
Yes, it is certified to ISO 13849-1 (PLe, Category 4), SIL3, and other international standards, making it suitable for safety-related applications on machine guards and access doors.
| Specification | Details | | :--- | :--- | | | Standard type (Non-contact) | | Output Type | PNP | | Connector | M12 connector with 0.3 m pigtail cable | | Core Count | 8 cores (Brown, Blue, Black, White, Red/Black, Red/White, Gray, Light Blue) | | Operating Distance (Front) | Sao (OFF→ON): 10 mm, Sar (ON→OFF): 18 mm | | Operating Distance (Side) | Sao (OFF→ON): 6 mm, Sar (ON→OFF): 14 mm | | Response Time | 20 ms + 2 ms × (cascaded units - 1) for detection to non-detection | | Control Output (OSSD) | 2 transistor outputs, max load current 150 mA | | Supply Voltage | 24 VDC ±20% (Class 2) | | Power Consumption | 0.8 W | | Enclosure Rating | IP65, IP67, IP69K, NEMA Type 3/4X/12/13 | | Operating Temperature | -20°C to +55°C | | Applicable Standards | ISO 13849-1 (PLe, Cat. 4), IEC 61508 (SIL3), etc. | | Weight | Approx. 80 g |
The Keyence GS-11PC belongs to the GS Series of safety interlock switches. It is a non-contact, magnetic/RFID-coded safety switch designed to monitor the status of guards, doors, and gates. Key Features
What or relay model are you connecting the outputs to? Count the flashes to identify the fault code
: 20 ms for detection (plus 2 ms per additional cascaded unit).
OFF): 18 mm (The distance at which the sensor drops the safety outputs when the door opens). Saocap S sub a o end-sub →right arrow ON): 6 mm. Sarcap S sub a r end-sub →right arrow OFF): 14 mm.
Without the manual, you risk: