How Do I Reset My Parrot Mki9200 Without Remote Extra Quality Jun 2026

If you just want to connect a new phone:

[Car Battery Power] ---> (12V Ignition Fuse / Joint Box) ---> [Parrot Blue Brain Box] | Pull Fuse / Disconnect Harness | ( Wait 60 Minutes for Cap Drain ) | [System Storage Hard Reboots]

The MKi9200 should automatically detect the file and ask if you want to update. Because you cannot press "Yes" without the remote, this method works best if the unit detects a corrupt system and initiates an auto-recovery/reset process. Method 4: The "Remote Emulation" Technique

Press and hold the Green (Answer) , Red (End Call) , and Center Jog Wheel (if your model has an integrated one) buttons simultaneously for approximately 10 seconds . how do i reset my parrot mki9200 without remote

Once the system fully restarts, you will be greeted with the "Welcome to Parrot" voice prompt or a setup wizard. The unit will no longer remember your old phone. This confirms a successful factory reset.

Plug it into the MKi9200's USB cable. If the unit detects the update, it may overwrite existing data and reset the device. JustCarKits 4. Clearing "Memory Full" Errors If you are trying to reset because of a "Memory Full" message but cannot access the menu:

, which links the Parrot system to your factory steering wheel buttons, you can perform a factory reset without the remote. JustCarKits Enter the Menu : Press the following steering wheel button sequence: Track Forward, Track Back, Track Forward, Track Back Navigate to Settings Track Forward If you just want to connect a new

Locating and disconnecting the main blue control box from the car's wiring for about one hour can force the system to reboot.

: If you have the remote but it isn't responding, replace the CR2032 battery first.

The MKi9200 is stubborn but not invincible. With patience and the steps above, you can restore it to factory condition without ever touching the missing rotary remote. Once the system fully restarts, you will be

: Remove the car battery terminal or disconnect the Parrot control box (usually hidden behind the dashboard) for at least 10 minutes to allow the capacitors to discharge. Check Wiring

If you have a computer and a USB cable, you can use the USB port on the Parrot unit to force a firmware update/reset.

If you are locked out because you do not have the remote, this comprehensive guide covers every method available to get your car kit back to factory settings.

: If you still have your remote but it isn't responding, try replacing the CR2032 battery