Ericsson Mini Link Cli Commands !exclusive! Jun 2026

The heart of the MINI-LINK is the radio modem. These commands control TX power, frequencies, and link performance.

: Activates a loopback facing out toward the microwave link to test remote connectivity.

Shows the Received Signal Level (RSL) in dBm. Crucial for diagnosing fading, misalignment, or weather attenuation. Configuring Radio Parameters set radio-link frequency Use code with caution.

show system : Displays the overall system status, uptime, contact information, and location details.

MINI-LINK nodes handle both traditional TDM traffic and modern Ethernet/IP packet traffic. IP and Routing Configuration ericsson mini link cli commands

show license : Verifies active features and capacity licenses (e.g., adaptive modulation limits, extra Ethernet ports).

Always run config compare running startup before a reboot to ensure your changes are saved. And remember, ? is your best friend—Ericsson’s CLI context help is remarkably detailed.

Tests fundamental IP reachability to the far-end node or gateway. set radio-link [link_name] loopback [near-end/far-end/off] Use code with caution.

Ericsson MINI-LINK is a widely deployed microwave transmission solution used in mobile backhaul and private networks. While the graphical user interface (Element Manager) is useful for basic configuration, network engineers rely on the Command Line Interface (CLI) for rapid troubleshooting, automated scripting, and advanced configurations. The heart of the MINI-LINK is the radio modem

Before running network modifications, you must establish an authenticated session and escalate your access rights. Initial Remote Access

Managing the Microwave Multiplexing Unit (MMU) and the radio frequency (RF) parameters ensures link stability and optimal throughput. show radio-link Use code with caution.

/admin> ls system radio ethernet services alarms /admin> cd radio/1 /admin/radio/1> pwd /network/radio/1

When network issues arise, the CLI transforms into a diagnostic powerhouse. Getting a clear picture of ongoing issues starts with retrieving real-time information. The get_alarms command lists all active alarms on the node, including their severity (critical, major, minor, or warning) and their source. Shows the Received Signal Level (RSL) in dBm

Verifies active software licenses, capacity limits (e.g., adaptive modulation limits), and feature activations. show temperature Use code with caution.

If you need to change the transmission channel or output power (TX Power) to mitigate interference:

This guide provides a comprehensive overview of essential Ericsson MINI-LINK CLI commands for configuration, troubleshooting, and monitoring. Accessing the CLI

: Enters configuration mode to modify system settings. exit : Moves back one level in the command hierarchy. top : Returns directly to the root configuration level. 2. System and Hardware Diagnostics