Quingo Air 1 User Manual

Locate the battery pack. Slide it onto the rear deck mount until the spring-loaded lever locks it. Plug the Anderson-style power connector into the control module.

(under display) – insert key and turn to “On” position. Turn to “Off” to disable controls.

features simple, intuitive controls designed for ease of use.

Locate the tiller adjustment lever or knob at the base of the steering column.

Displays current charge levels. Green indicates full power, yellow indicates partial charge, and red means immediate charging is required.

This scooter is classified as a Class 2 vehicle. It is designed for use on pavements, footpaths, and pedestrian zones. It should not be driven on dual carriageways or public roads except to cross them.

Your Quingo Air 1 arrives partially folded. Follow this exact sequence from the user manual:

The maximum carrying capacity for the Quingo Air 1 is 136 kg (21.5 stone / 300 lbs). Exceeding this limit will void the warranty and compromise safety.

Your safety is our primary concern. Please read and follow these guidelines every time you use your Quingo Air 1.

Look at the freewheel lever on the rear right side of the motor. If it is in "freewheel" mode (pushed forward), the scooter will not drive electrically. Push the lever back into "drive" mode and turn the ignition key off and back on to reset.

Use only the provided charger. Plug the charger into the tiller charging port and then into a wall outlet. Charge Cycle: Charge your batteries fully after every use.

He pushed the paddle again. This time, gently. This time, with respect.

Loosen the tiller adjustment knob, lower the handlebars toward the floor pan, and tighten the knob to secure it.