V2000-c User Manual __exclusive__ 99%

Most V2000-C units ship with a default IP (commonly 192.168.1.100 ). Set your laptop to the same subnet.

Shift the small black jumper block from its standard parking slot (Pins 1–2) over to .

The buzzer will emit a long confirmation beep, signifying successful token enrollment. Setting the Global Door Access Mode

To configure the V2000-C, you must enter . While in programming mode, the indicator light will change color (usually flashing red or amber), indicating that the system is ready to receive commands.

For proper site safety, change the default master password immediately upon deployment. Enter programming mode ( # + 12345 ). Press (Orange LED turns on, Red/Green turn off). Enter your new 5-digit system password . v2000-c user manual

The is primarily a standalone access control keypad designed for single-door security. It allows authorized entry via RFID cards, numeric PINs, or a combination of both. Key Hardware & Technical Features

Press * + Master Code + # (Default Master Code is 999999 ) Exit Programming Mode: Press * Changing the Master Code

Works with 125KHz EM standard RFID cards/tags. Power Input: 12VDC ± 10%.

V2000-C Access Control Keypad Go to product viewer dialog for this item. : Comprehensive User Manual & Installation Guide Go to product viewer dialog for this item. Most V2000-C units ship with a default IP (commonly 192

: Features a rugged white plastic or stainless steel enclosure with a weatherproof silicone keypad.

All configuration steps require placing the terminal into first. 1. Initializing Programming Mode

Supports Card Only, PIN Password Only, or Card + PIN combined verification.

: Connect to the positive terminal of a stable 12V DC regulated power unit. The buzzer will emit a long confirmation beep,

is a standalone single-door security system designed to restrict or grant property entry. This rugged device utilizes to deliver robust access management for homes, commercial offices, and secured sections of buildings.

is a robust RFID access control keypad. It is designed to manage entry for a single door. Card Only, PIN Only, Card + PIN.

: Press # + [Master Code] + 2 + [4-Digit User ID] + [Present RFID Card] + 6 .