Xp-k200l Driver — Xprinter
Download the .zip or .exe installation file to your local drive. Step 2: Prepare the Hardware
Ensure cables are tight. If you moved the USB cable to a different port, update the port setting in Printer Properties. Driver mismatch
This is the recommended method for first-time users:
You can adjust the density (darkness) of the text if the print is too light. 5. Troubleshooting Common Driver Issues Potential Solution Printer prints symbols/Chinese characters
In the printer properties (Windows Printer and Faxes), go to Device Settings and ensure "Auto-Cut" is enabled to cut receipts automatically after printing. xprinter xp-k200l driver
It is highly recommended to download the driver from official or trusted sources to avoid malware.
If using , ensure the printer is plugged in and turned on.
Navigate to the official Xprinter website or a verified POS hardware distributor portal.
Download the "Xprinter Driver for Windows" (usually a .zip file). Download the
Navigate to and click the "+" button.
Go to Printer properties > Device Settings . Here you can choose whether the printer cuts the paper after each individual receipt or at the end of a multi-receipt batch.
This is the most common setup. Follow these instructions precisely to avoid "driver signature" errors.
Several reputable third-party driver repositories host verified Xprinter XP-K200L drivers. The table below summarizes the key driver files available: Driver mismatch This is the recommended method for
Each printer must be installed separately. When adding additional printers, assign unique port names (e.g., USB001, USB002) to distinguish between them. The Add Printer Wizard can help manage multiple devices.
For advanced barcode software (like Bartender or NiceLabel), you can also use which support the XP-K200L under “XPrinter” or “Generic Thermal Label Printer.” These offer finer control over label alignment and sensors.
In the printer series selection menu, choose or XP-80C (the standard series for 80mm Xprinter devices).
