Enhancements in signal processing to make measurements more precise.
Drag and drop the extracted .bin file directly into the root directory of the Owon drive.
Once the update successfully completes, always perform a . Disconnect all probes from the CH1 and CH2 inputs. Go to System Menu →right arrow Calibrate . owon hds2102s firmware update link
If you have confirmed the firmware is compatible with your hardware, the general update process is as follows:
Disclaimer: Firmware links and version numbers change over time. Always verify the file integrity and model compatibility with OWON official support before proceeding. The author is not responsible for any damage resulting from improper firmware updates. Enhancements in signal processing to make measurements more
. However, users should proceed with caution: OWON has previously advised against updating if the device is functioning correctly, as firmware versions are often tied to specific hardware serial number ranges. Update Instructions If you have a compatible firmware file, follow these steps to update: Preparation : On your scope, press F2 (System) Connection : Set the USB mode to (Mass Storage Class) in the system menu.
By taking this cautious and informed approach, you can avoid the potential pitfalls of a failed or incompatible update. Disconnect all probes from the CH1 and CH2 inputs
While the direct firmware link for the Owon HDS2102S is straightforward, the decision to use it is not. The existence of multiple hardware revisions (v1.x, v2.x, v4.x) means you cannot simply download and install any update you find. Your safest course of action is to follow these steps:
. The device will appear as a removable disk on your computer. Transfer File : Copy the file to the root of the removable disk.
Copy the downloaded firmware file to the root directory of your USB drive or connect the scope via USB.