An improper upgrade can brick your device. Read every step before proceeding.
Upgrades resolve common system freezes, battery calibration issues, and charging glitches.
To upgrade the software on your Satlink WS-6979 device, you will need:
The WS-6979 allows for easy updates directly via its USB port. Download the .bin firmware file for the WS-6979. Satlink Ws-6979 Software Upgrade
Upgrading the software of your Satlink WS-6979 device is a straightforward process that requires minimal technical expertise. By following the steps outlined in this article, you can ensure that your device continues to perform optimally and efficiently. Regular software upgrades will also ensure that your device stays compatible with the latest satellite systems and equipment.
For most users, unless you are experiencing a specific bug or need to load a custom satellite list.
Firmware flashing carries a small risk of bricking your device if interrupted. Gather the following materials and verify these conditions before starting: Required Tools An improper upgrade can brick your device
After thorough preparation, follow these precise steps. The MicroSD method is widely considered the safest.
If you decide to proceed, here is the technical process involved. Note that this is not a simple "over-the-air" update; it requires a Windows PC.
Once your files and equipment are ready, follow these sequential steps to perform the upgrade: Step 1: Insert the Media To upgrade the software on your Satlink WS-6979
Download the official Satlink WS-6979 firmware file (typically ending in .bin or .abs ).
What or build date is your meter showing?
Never rename the firmware file unless explicitly instructed by the manufacturer documentation. An incorrect file extension or name can cause the bootloader to reject the file or corrupt the flash memory. Step-by-Step Software Upgrade Procedure
Improved AZ/EL angle calculations and spectrum analyzer performance. Database Updates: New pre-loaded satellite and TP (Transponder) data.
The 7.4V/3000mAh battery must be charged to at least 70% or connected to the DC12V power adapter. Storage Media: