Kes Geyser Load Control Timer Manual New -

Clears all internal memory and settings. Step 1: Resetting the Device

Built-in rechargeable Ni-MH battery (retains memory for up to 150 hours during power outages) Time Increments: 1-minute intervals

If the controller is set to activate after peak hours (e.g., after 8 PM), it may have a randomized delay of up to 30 minutes before switching on to prevent a sudden surge on the power grid.

The button shifts the operational state of the timer. A small indicator line or text at the bottom of the screen will point to your current mode: kes geyser load control timer manual new

This manual provides clear, step-by-step instructions to set up, program, and troubleshoot your new KES digital load control timer. Technical Specifications and Layout

With the ever-increasing cost of electricity, managing energy consumption has become a priority for many households. In regions like South Africa, where power grids face peak demand periods, solutions like the Geyser Load Control Timer are essential. The , particularly the ISG1201 model , is a device specifically designed to help homeowners reduce their electricity bills and contribute to a more stable power grid by automatically managing when their geyser operates. This device is a practical solution for those looking to optimize their hot water usage without having to remember to manually switch the geyser on and off every day.

Press and M+ to set the exact time you want the geyser to turn ON (e.g., 04:30 AM for morning use). Clears all internal memory and settings

Press again: The screen will show "1 OFF" (First program off time). Press Day , Hour , and Min to set the desired turn-off time.

Verify that the timer is set to AUTO mode rather than OFF . Check the current system time to ensure the AM/PM or 24-hour setting is accurate. Review your program to confirm the chosen days match your current day.

Always OFF. Power only flows if you manually select an override. 3. How to Set the Clock A small indicator line or text at the

is a DIN rail-mounted digital timer installed within the distribution board (DB Board). It works by allowing the user to set specific times for the geyser to turn on and off, preventing it from running 24 hours a day or during peak electricity demand times.

as it involves high-voltage wiring in the distribution board. : It can be mounted on a

Lost in translation? 🤔 The new KES Geyser Load Control Timer manual is out, and it’s a game-changer for managing your power consumption.