: Re-identifying the true capacity of the drive if it has been incorrectly reported. Configuration Tuning
After finalizing all settings, click "OK" to return to the main window. Click the "Start" button (often labeled "Start" or "Space Start"). A progress bar will appear, and the tool will begin writing the firmware, low-level formatting, and checking for bad blocks. This process can take anywhere from a few minutes to several hours, depending on the drive's capacity, the number of bad blocks, and the ECC setting chosen. , as interrupting it is a surefire way to permanently brick the drive.
: For troublesome low-quality NAND, increasing the Error Correction Code (ECC) value can make the flash drive usable. A common recommendation for restoring full capacity to a problematic drive is to set the ECC to a value of 49 . However, a higher ECC setting may slightly impact performance or usable capacity in favor of stability.
This is not a data recovery tool. The MP Tool will destroy all data on the drive during the process. If you need to recover files, use tools like Recuva or PhotoRec before using the MPTool.
Follow these sequential steps to re-flash your corrupted flash drive. Step 1: Identify the Hardware
