Skope Heated Towel Rail Timer Instructions -

Select your desired duration. The rail will heat immediately and shut down once the countdown finishes, ensuring you don't accidentally leave it on all day. 4. App Integration (For Smart Models)

Create highly specific time blocks down to the exact minute.

To program weekdays and weekends separately, toggle until or Sat-Sun is displayed.

Use the arrow keys to select the exact time you want the towel rail to start heating up. Tip: Set this 30 to 45 minutes before your shower. Press PROG to lock it in.

A heated towel rail brings luxury to any bathroom, but running it 24/7 can unnecessarily drive up your electricity bill. By programming your Skope heated towel rail timer, you ensure warm towels exactly when you need them while maximizing energy efficiency. skope heated towel rail timer instructions

: To exit the menu and save your settings, press the Set and Up buttons together. Adjusting Temperature Setpoints

Most Skope heated towel rail installations utilize a dedicated digital wall controller or an inline programmable timer switch. Before adjusting the settings, it helps to understand the standard interface layout. Key Buttons and Functions Enters programming mode and confirms settings.

Switches between automatic programmed mode and manual operation. RESET: Clears all settings and restores factory defaults. Step-by-Step Programming Instructions

Press and hold the main power button ( ① ) for about 5 seconds. The display will switch from showing a temperature (thermostat mode) to showing ON or OFF (towel rail timer mode). Select your desired duration

Press and MIN to set the exact time you want the towel rail to start heating.

Continue pressing the button to cycle through the available time durations. Stop pressing when the LED matches your desired heating duration.

Press the Set/Program button until a program number (e.g., P1) appears on the screen.

If your daily routine changes, you can bypass your automated schedule without deleting your programmed settings. App Integration (For Smart Models) Create highly specific

Digital programmable timers allow you to set specific schedules for weekdays and weekends. They usually feature a liquid crystal display (LCD) and four to five buttons: , DAY , HOUR , MIN , and MANUAL/OVERRIDE . Setting the Current Time and Day

: If the timer is unresponsive, use a pin to press the small Access Time Settings : Press and hold the button (or ) until the year begins to flash. Adjust Values Boost/Advance arrows to set the year, then press to confirm and move to the month and day. Set Hours/Minutes

Disclaimer: Ensure all electrical work is performed by a licensed professional. Refer to your specific Skope model's manual for model-specific instructions. If you need a more tailored guide, please let me know: The (e.g., TBC, TDC)?

Quick Tip: You can press and hold down the advance arrow keys for rapid data adjustments when dialing through the 60-minute cycle parameters. 5. Engaging the 2-Hour Quick Boost Function

Before programming schedules, you must set the current day and time.