Manually open the garage door halfway. The door should remain suspended in place. If it drops or shoots upward, adjust the springs before installing the automation.
: Guidelines for connecting the internal control unit to a 230V power supply and auxiliary devices like photocells or flashing lights. Limit Settings
Always isolate the main grid power supply before touching the internal wiring of the control board.
This product is marked with the symbol of the crossed-out wheeled bin. It means that the device should not be disposed of with other household waste at the end of its operational life. You must dispose of it by returning it to a designated collection point for the recycling of waste electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health. Manually open the garage door halfway
Hereby, declares that the radio equipment type PROBO PR70 / PR70-DL is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.lifehomeintegration.com/doc/probo-pr70
: Set the open and closed positions by moving the mechanical stops on the rail.
Houses the 24V DC geared motor, the control board with a built-in radio receiver, and the courtesy light. : Guidelines for connecting the internal control unit
The PR70 series is built for durability and precision, featuring an internal encoder for accurate movement control. 230V AC mains / 24V DC motor. Max Power / Thrust: 310W / 1100N. Operating Speed: 0.10 to 0.18 m/s. Temperature Range: -20°C to +70°C. Weight: 6.7 Kg. 2. Preliminary Installation Checks
Align the lenses perfectly until the receiver LED glows steady green.
: Standard installation works for sectional doors; up-and-over doors require the APRB oscillating curved arm . It means that the device should not be
Hold Bluetooth button 5 sec → reconnect app.
, this system is recognized for its compact design and high-performance safety features. Technical Specifications According to documentation from Life Home Integration , the system includes: Motor Type : 24V DC motor designed for intensive use. : 700N, suitable for doors up to 10 square meters.
The maximum height of the door to be automated depends on the length of the runner used, which is provided separately from the operator. The values reported assume the gate is perfectly balanced.
Pull the release lever to close the gate, rest the mechanical stop against the drive carriage, and fix it in place. Opening Stop:
The system will automatically run one complete cycle to map travel limits and obstacle detection profiles. Programming Remote Controls