Users on forums like USBDev.ru and FlashBoot.ru report high success rates in "reviving" dead drives that show as "0 bytes" or "unreadable". Ease of Use Issues:
Click on the or Bin Setting button (this may require entering a blank password or 888888 ).
Optimized for high-level data adjustments, such as changing vendor IDs (VID/PID), creating CD-ROM boot partitions, or locking write-protection flags without modifying the underlying memory cell structure. 🔍 Step 1: Pre-Flash Diagnosis
Before downloading the tool, ensure your drive actually uses a FirstChip FC1178 or FC1179 controller. firstchip fc1178 fc1179 mptools v1052 updated
No. MPTools is a Windows‑only application that relies on low‑level USB HID drivers. You can run it in a Windows virtual machine on Linux/macOS, but USB passthrough can be unreliable.
If the drive is completely dead, look into manual hardware test-shorting (shorting the I/O pins on the NAND chip) to force the controller into ROM boot mode. 2. "Write Configuration Error" or "Bad Block Over" The NAND flash chip may have degraded beyond repair.
Solved issues where B16/B17 chips would show incorrect space after formatting. Features and Improvements in FirstChip MpTools v1052 Users on forums like USBDev
The software should automatically detect the drive in one of the numbered blank boxes. If it does not appear, click the button. Step 4: Configure the Settings (Optional)
Fix drives that show a significantly smaller capacity than their physical size.
MPTools are primarily used by technicians and advanced users for: Repairing "No Media" Errors 🔍 Step 1: Pre-Flash Diagnosis Before downloading the
: Added support for newer generations of TLC and QLC flash memory chips from Samsung, SanDisk, Kioxia, and Micron.
When a USB flash drive stops working, shows a "Write Protected" error, or displays "Insert Disk," it is rarely a hardware failure. Most often, the drive's firmware has corrupted. For flash drives utilizing FirstChip controllers—specifically the widely used FC1178 and FC1179 chipsets—the solution lies in using the official Mass Production Tool (MPTool).
Includes improved support for newer flash IDs, particularly fixing issues with B16/B17/8A1A and 7THL/7DDL flash memory chips.
Flashing firmware carries a risk of permanently bricking hardware if done incorrectly. Follow this workflow carefully to restore or reprogram your drive. Step 1: Identify Your Controller