Sinotimer Tm630s Manual

Since specific manufacturer manuals for these imported digital time switches can be sparse, this guide compiles the standard operating procedures for the TM630S module, which is widely used for industrial control, street lighting, and appliance automation.

Before wiring the device, ensure your electrical load matches the TM630S capabilities: 110V, 220V, or 12V DC (model dependent) Capacity: 30A Heavy Duty Display: Large LCD with backlight Programs: 28 ON/OFF settings per day Battery: Built-in CR2450 for memory backup Time Range: 1 second to 168 hours 🔌 Wiring and Installation

For your programs to work, you must cycle the manual button to AUTO . If your device is currently supposed to be off, set it to AUTO OFF . If it is supposed to be running right now, set it to AUTO ON . 7. Troubleshooting and Maintenance

The unit features an LCD screen displaying the current time, status, and program details. Key icons include:

Press the C/R (Cancel/Recall) button 4 times quickly. The "a" or lock icon on the screen will disappear. 2. Setting Current Time Press and hold the CLOCK button. While holding CLOCK , press: D+ (Day): Set the current day of the week (Mo, Tu, We...). H+ (Hour): Set the current hour. M+ (Min): Set the current minute. S+ (Second): Set the current second. 3. Setting ON/OFF Events Press P (Timer) once; "1 ON" appears. sinotimer tm630s manual

The incoming live feed for the first load.

This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.

If your manual doesn't match, check if you have the (which has dual channels/outputs) or the TM630S-A (which has astronomical clock functions). The base TM630S covered here is the single-channel 16A/25A version.

Crucial Step: For the timer to work automatically, the display must show . If you manually turn it ON, you must press Manual until it cycles back to AUTO for the programmed events to take over. If it is supposed to be running right now, set it to AUTO ON

12V DC, 24V DC, 110V AC, or 220V AC (check your specific model sticker). Switching Capacity: 30 Amps resistive load (maximum). Time Control Range: 1 second to 168 hours. Programs: 28 On/Off settings per day.

Internal 1.2V/40mA rechargeable battery (lasts up to 60 days without power). Load Capacity: 30A (Resistive) / 16A (Inductive). Mounting: 35mm DIN Rail. 2. Installation Guide (Wiring)

Connect the device to live incoming power for at least 10 minutes to charge the internal capacitor. If it remains blank, press the C reset button. The timer clicks, but the connected device does not turn on Cause: Incorrect wiring or a blown load fuse.

Locate the (or Manual) button. If a lock icon (🔒) is visible on the screen, press the C/R button 4 times quickly to unlock the keypad. Key icons include: Press the C/R (Cancel/Recall) button

is distinguished by its 1-second minimum interval, allowing for highly precise switching compared to standard 1-minute timers.

The Sinotimer TM630S is a micro-computer controlled digital timer switch designed for automating electrical appliances. It allows users to program specific ON and OFF times for devices, reducing energy consumption and enhancing convenience. This report consolidates the essential operational instructions, technical specifications, and programming guidelines found in the standard user manual.

Sets the day of the week (e.g., Monday through Sunday or combinations of days). H+ (Hour): Sets the current hour or program hour. M+ (Minute): Sets the current minute or program minute.