Autocom 2020.23 Windows 11 [new] -

If you get a "Communication Error," try updating the firmware within the software settings while connected to a 12V power source (car).

While Autocom 2020.23 was released before Windows 11 became mainstream, it is generally functional on the new OS. However, because this software often relies on older drivers, it requires specific installation steps to function properly. Why Windows 11?

Right-click the .zip or .rar archive and select using WinRAR or 7-Zip.

The primary issue with Windows 11 and Autocom 2020.23 is not the software itself, but the (often the VCI interface). Windows 11 enforces strict memory integrity (Hypervisor-protected Code Integrity) and requires SHA-2 signed drivers.

AutoCom 2020.23 remains one of the most reliable and widely used diagnostic software versions for cars and trucks. While it was originally designed for older operating systems, you can run it smoothly on Windows 11 with the correct configuration.

Disclaimer: This article is for informational and educational purposes. Using cracked or patched software may violate software licensing agreements and local laws. Always use legitimate, licensed software for commercial vehicle diagnostics. autocom 2020.23 windows 11

Getting (or Delphi 2020.23) to run smoothly on Windows 11 can be tricky due to updated security protocols, but it is definitely possible. If you’re looking to get your diagnostics back up and running, follow this checklist! Key Requirements: OS: Windows 11 (64-bit). Hardware: Autocom/Delphi VCI (Single or Double PCB). Software: Autocom 2020.23 installer files. Installation Steps:

Locate the device under Other Devices (it may show a yellow warning triangle). Right-click the device and select . Choose Browse my computer for drivers .

: USB port for the hardware interface and Bluetooth (SPP) for wireless diagnostics. Step-by-Step Installation Process

Toggle to Off . (Note: You can turn this back on after adding an exclusion folder).

Scroll down to and click Add or remove exclusions . If you get a "Communication Error," try updating

When prompted by the automated setup package, provide the globally distributed archive password: ThankYou .

Use the standard installer password (commonly "ThankYou" or similar, as noted in many installation guides).

This method involves installing the software directly onto your Windows 11 operating system.

Use the provided 2020.23 Keygen tool to open and patch the XML file.

Look for an unknown device or a device labeled or Ports (COM & LPT) with a yellow warning triangle. Right-click the device and select Update driver . Choose Browse my computer for drivers . Why Windows 11

Run your version-specific keygen or send this XML file to your software distributor for activation.

Autocom 2020.23 relies on a USB-to-J1708/CAN driver (often an outdated FTDI or Silabs driver) that is . This is the #1 reason installations fail.

Run through this checklist after installation:

Connect the USB cable from the unit to your Windows 11 laptop.