Re-check that you covered the chip with tape.
Connect the printer to your computer via a stable USB cable.
The printer can no longer read any toner chip. It will assume the cartridge is always full. You will lose low-toner warnings, but the printer will print until toner physically runs out.
Remember: Once fixed, . Your printer will work for years using $10 refill toner instead of $70 genuine cartridges. Re-check that you covered the chip with tape
Flashing firmware carries a small risk of bricking your device if done incorrectly. To ensure success, gather the following information and tools: 1. Identify Your Exact Firmware Version
The status light should now shine a steady . If you check the printer status monitor software on your computer, it will display the toner capacity permanently at 100%. You can now refill your cartridge with toner powder indefinitely without buying replacement chips. Troubleshooting Common Errors The Status Light is Red After the Reset
If you own a Samsung ML-2165 or ML-2168 printer, you are likely familiar with the frustration of the printer refusing to print because the toner chip reports "no toner," even after you have refilled the cartridge. This is a common issue designed to ensure you purchase official, often expensive, replacement cartridges. It will assume the cartridge is always full
The phrase "676 link" often refers to specific file archival directories or generator tools used by firmware developers to package modified .hd firmware files.
Ensure the printer is connected directly to your computer via a USB cable. Make sure you are using Windows.
A 15-character alphanumeric string unique to your machine. Your printer will work for years using $10
A firmware fix (often called a "crum-fix" or "chipless firmware") is a modified version of the printer's internal operating system. Once uploaded to the printer, it instructs the motherboard to ignore the presence of the cartridge chip. The printer will always read the toner level as 100%, allowing you to refill your cartridge infinitely without ever buying a new chip. Step-by-Step Guide to Resetting ML-2165 / ML-2168 Firmware
(e.g., “UniNet MLT-D116S chip resetter”):
Provide instructions on how to check your specific firmware version to confirm it is .
If the light is red after the fix, the chip was likely not taped over properly, or the wrong firmware was installed.