6 x Audio jacks (Line-In, Line-Out, Microphone, Center/Subwoofer, Rear, Side) BIOS Recovery & CMOS Clear Jumpers
You may also find this board referenced as MS-7613 v1.0 or v1.1 , or MS-7613 rev2.0 . While the basic hardware layout is the same, BIOS versions often differ across revisions.
The Retro Web maintains a mirrored PDF covering I/O ports, internal connectors, and BIOS reset procedures. ⚙️ Key Technical Specifications Socket Chipset Intel H57 Express Memory 4 slots, DDR3 1066/1333 MHz (Max 16GB) Form Factor Micro-ATX (24.4 cm x 24.4 cm) Expansion 1x PCIe x16, 3x PCIe x1, 1x Mini-PCIe Storage 4x SATA II (3.0 Gb/s) 🔧 Common Maintenance Tasks Motherboard Specifications, MS-7613 (Iona-GL8E)
Because this is an OEM board, a traditional "retail" manual is not available. However, comprehensive technical specifications and jumper diagrams can be found through the following resources: Official Specification Sheet
If you are upgrading, repairing, or restoring an older machine based on this board, you need the technical specifications to understand compatibility, particularly for memory and processor upgrades. ms 7613 ver 11 motherboard manual link
OEM motherboards usually lack color-coded labels on the board itself. If you are moving this motherboard to a new computer case, use the following layout for the (Front Panel) header.
A few important clarifications first:
Navigate to the HP Manuals page and enter your specific HP desktop model number.
If you lost the manual, here is a quick reference for the most important BIOS settings (page 31-38): ⚙️ Key Technical Specifications Socket Chipset Intel H57
? Yes, the PCIe x16 slot supports modern GPUs, but the bottleneck will be the older CPU. Also, ensure your Power Supply Unit (PSU) has enough wattage and the required 6-pin/8-pin connectors.
Complete wiring layouts, clear jumper setting diagrams, and verified RAM upgrade rules. 2. HP Desktop Product Guides
: This is the most comprehensive, direct PDF document covering BIOS settings, jumper locations, and header pinouts.
The comprehensive hardware reference guide for your PC, which contains the MS-7613 motherboard installation steps. 3. Alternative Community Repositories If you are moving this motherboard to a
This motherboard is highly specific about DDR3 RAM density. It generally struggles with single-rank 4GB sticks made with modern, high-density memory chips. For best compatibility, look for older "low-density" dual-rank (chips on both sides of the stick) 4GB DDR3 modules.
Locate the 3-pin jumper labeled CLR_CMOS . Move the jumper from pins 1-2 to pins 2-3 for 5–10 seconds, then return it to the original position.
I can provide specific diagrams or step-by-step instructions based on your goal!
Look for a 9-pin block labeled , usually at the bottom-right corner of the board. Pins 6 and 8 are for the power switch (no polarity). Page 21 of the manual has a full diagram.