You can purchase the official update disc from several sources:
The final official update for this generation is Version 18.1 (U9A) , which was released in late 2018. While newer street layouts might not be reflected, this is the most current data available for this hardware. Part Number: Look for part number 86271-GEN06-18 .
The 2010 Toyota Prius is equipped with a navigation system. Unlike newer vehicles that use cloud-based "Dynamic Navigation" or SD cards, this system stores its map database on a physical DVD located behind the touchscreen display.
Background
Unlike older systems that used DVDs, the for map data. 2010 toyota prius navigation dvd update
Updating the system does not require specialized tools and typically takes less than 15 minutes.
: While dealerships originally charged near $200, you can find original or high-quality secondary market discs on platforms like eBay for significantly less.
If the system cannot read the new disc, it may be dirty or scratched. Gently wipe the disc with a microfiber cloth.
Do not turn off the car, shift into gear, or press any dashboard buttons while this process runs. Interrupting the data transfer can corrupt the system firmware. You can purchase the official update disc from
The correct update DVD must be a disc compatible with 2010-2011 Prius models, which are "Non USB Gen 6 Model Only".
Be wary of incredibly cheap listings that appear to be burned or bootlegged copies on standard blank DVDs, as low-quality laser burns can cause reading errors on the older disc reader. 🔧 Step 3: Install the New Map DVD
Missing out on newer, faster bypasses or highways.
A: No. Toyota locked the HDD update process to the DVD drive exclusively. There is no hidden USB update for this generation. The 2010 Toyota Prius is equipped with a navigation system
Remove the new navigation update DVD from its case, handling it strictly by the edges.
Disclaimer: Ensure you are using genuine or compatible software to avoid damaging your navigation unit.
Remove the new update DVD from its case, handling it strictly by the edges to avoid fingerprints. Insert it into the slot. Slide the plastic dust cover back into place. Step 5: Wait for the System to Initialize
The if you decide to replace the unit.