On High Sierra | Install Pro Tools 103 10

The built-in Pro Tools 10 uninstaller does not work on High Sierra. To remove it later, you must delete files manually.

Installing on macOS High Sierra (10.13) is not officially supported by Avid, as the software was only qualified up to OS X 10.8.5. While the installer typically blocks you with an "incompatible version" error, you can bypass this using a terminal-based workaround. Feature Highlight: "The Terminal Override"

Restart your Mac and hold down to enter Recovery Mode .

If prompted with administrator privileges, click and enter your Mac password. install pro tools 103 10 on high sierra

Run the standard installer. The modern version is fully compatible with High Sierra and will successfully manage your Pro Tools 10 license authorizations. Step 5: Apply the High Sierra Terminal Fixes

Double-click your Pro Tools 10.3.10 installer DMG.

: Before attempting an unsupported install, create a system image or use Time Machine. The built-in Pro Tools 10 uninstaller does not

Go to Setup > I/O and default your inputs and outputs. You may need to clear out old legacy paths and rebuild them to match your current interface.

This is not an officially supported configuration by Avid. While it can work, it may not be as rock-solid as running it on a period-correct operating system like OS X 10.8 or 10.9.

Look through the package contents inside Pacifist to find the core components: ProToolsApp , ProToolsCodecs , and ProToolsSys . While the installer typically blocks you with an

Double-click the downloaded .dmg file to mount it on your desktop.

It will warn about “this software is incompatible with this version of macOS.” Workaround: Right-click the Pro_Tools_10_3_10_Installer.dmg > Show Package Contents. Navigate to Contents/Resources and launch Pro Tools Installer.mpkg directly. This bypasses the initial OS check.

: Some users find and edit the Distribution file inside the expanded package to remove the OS version check.

To circumvent these barriers, you must temporarily modify the system version string that your Mac reports to installer files. Step-by-Step Installation Walkthrough Step 1: Disable System Integrity Protection (SIP)