: Place calibrated 10kg or 16kg test blocks manually onto the support trays built into the weigh frame.
Concurrently runs up to two belt weighers, two bin scales, or a blended combination of one belt weigher and one bin scale.
[Conveyor Belt Flow Direction] ===> ===> ===> __________________________________________________ | | [ Weigh Length: 3.6m to 11m ] | | [Lead-in] | [Idler 1] [Idler 2] [Idler 3] | [Lead-out] Idlers | | | | | Idlers ___________|_______|___________|___________|_______|__________ | | [========== 4x Shear Beam Load Cells ===] | v (Up to 1,000m Signal Run) +-----------------------+ | MaVIS-ICS-ARM Core | | IP66 Control Unit | +-----------------------+ Mechanical Alignment Principles
A: The standard IP66 enclosure offers good protection, but for intrinsically safe (IS) areas, the "Intrinsic Safety (IS) Barriers" option is critical for safe installation. mavis-ics-arm manual
The manual instructs you to load the provided GSDML-V2.42-MAVIS-ICS-ARM-2024.xml into TIA Portal or Studio 5000.
Run the conveyor belt entirely empty for at least three full mechanical revolutions.
The system must undergo rigorous validation sequences to maintain its commercial trade certification. Zero Calibration Sequence : Place calibrated 10kg or 16kg test blocks
: Operates on 110/240 Vac and supports cable distances up to 1000 meters to load cells and tachometers. Hardware & Installation Options
Duplex serial communications (RS232/RS485) compatible with . Wiring connects directly to the circuit board. Inputs/Outputs : 4 isolated analogue I/O slots (expandable to 6). 5 isolated digital I/O slots (expandable to 8). Standard outputs for rate, total, and alarms.
This refers to the internal network architecture that allows the MAVIS to communicate with other avionics, ground stations, and onboard mission computers. It handles data bus translations (MIL-STD-1553, ARINC 429, Ethernet). The manual instructs you to load the provided GSDML-V2
: The system is trade-certified for specific applications and offers high-reliability dual in-line belt weighing.
The provides essential technical guidance for operating the Intelligent Cargo Scale (ICS) , an advanced multifunctional weighing electronics controller developed by Control Systems Technology (CST) . This industrial-grade system manages high-precision bulk material handling operations by integrating mass data with real-time volumetric scanning. It is a critical component for achieving high-accuracy inventory control, custody transfer, and efficient maritime or mining trade operations.