Electronic Blood Pressure Monitor: X180 Manual

Wrap the cuff around your arm, roughly one inch above the elbow joint.

The year digits will now flash. Press to advance the year, then press SET to confirm. Repeat this step to set the month, date, hour, and minutes.

An icon depicting a shaking figure appears if you move too much during the test. You must restart the measurement. Using Memory Functions

Powers the unit on and starts or stops the inflation and measurement process. SET Button: Configures the date, time, and user profiles. electronic blood pressure monitor x180 manual

Shows systolic/diastolic pressure, pulse rate, date, time, and user memory profile.

: Pressure 0–299 mmHg (±3 mmHg accuracy) and Pulse 40–200 bpm.

Before using your X180 device, make sure to: Wrap the cuff around your arm, roughly one

If your device encounters issues, an error indicator will appear on the display screen. Refer to this chart for immediate solutions: Error Code Potential Cause Direct Solution No pulse signal detected. Check cuff placement over your bare skin. Re-align tube. Er 2 Excessive movement or talking. Sit completely still. Do not talk or move your arm. Er 3 Cuff is wrapped too loosely.

Self-measurement is for tracking, not diagnosis or treatment. Always consult a healthcare professional to interpret your readings.

The screen will briefly flash all icons, display a "0," and the voice prompt (if enabled) will welcome you. Repeat this step to set the month, date, hour, and minutes

Open the battery compartment cover on the bottom of the device.

This is for informational purposes only. For medical advice or diagnosis, consult a professional. AI responses may include mistakes. Learn more

For clinical accuracy, it is recommended to have the monitor checked for calibration every 2 years. 8. Troubleshooting Common Errors