Deckma Omd11 Manual !!link!! -
| Feature | Specification | | :--- | :--- | | | Scattered light method (optoelectronic) | | Range | 0-30 ppm (trend indication to 50 ppm) | | Accuracy | Meets IMO MEPC.60 (33) | | Alarm Operating Points | Two alarms, 2-15 ppm adjustable (Factory set: Alarm 1: ~10-12 ppm, Alarm 2: 15 ppm) | | Alarm Operating Delay | 2-20 seconds, adjustable | | Output Signal | 0 (4) - 20 mA, selectable | | Sample Temperature | +1° to 60° C | | Power Supply | 24 Volt AC/DC (other voltages on request) | | Degree of Protection | IP 65 | | Dimensions (W x H x D) | 175 x 190 x 220 mm | | Weight | 3.5 kg |
Requires mounting on a rigid vertical surface, ideally at eye level.
Insert a soft bottle brush dipped in a mild liquid detergent or a specialized oil solvent.
involves understanding its role as a critical environmental guardian on ships. Developed by DECKMA HAMBURG GmbH , it ensures that oily water is not illegally discharged into the ocean. deckma omd11 manual
The unit should be mounted on a rigid vertical surface, ideally at eye level, close to the oily water separator to minimize response delays.
Provides potential-free contacts for external processing (e.g., stopping the overboard discharge pump).
According to the manual, proper placement is critical for accurate reporting: Proximity: The monitor must be located within | Feature | Specification | | :--- |
Oily film build-up on the internal glass tube of the measuring cell is the primary cause of inaccurate readings. Clean the cell weekly or whenever a calibration error occurs.
Complies with IMO Resolution MEPC. 60 (33) requirements.
Consult the Deckma OMD11 manual’s index for "Calibration," "Modbus," or "Emergency operation." When in doubt, contact Deckma’s 24/7 hotline (found on page 2 of the manual). Developed by DECKMA HAMBURG GmbH , it ensures
is a specialized bilge alarm monitor designed to measure oil-in-water concentrations, ensuring maritime vessels comply with International Maritime Organization (IMO) regulations
The OMD-11 was developed by DECKMA HAMBURG GmbH to improve the reliability and operation of 15 ppm bilge alarms. It represents a new generation of monitors designed to overcome issues encountered with older systems, particularly regarding false alarms caused by solid particles commonly found in bilge water. This improvement in solids suppression is a key feature, allowing the OMD-11 to differentiate between oil particles and other solids like iron oxide, providing a more accurate reading of actual oil content.