Viva Water Dispenser Manual 8liech-sc-ssd !!top!! Jun 2026

If your dispenser isn't performing correctly, check these common fixes before calling support.

While the self-cleaning feature prevents biofilm, it is recommended to clean the exterior of the unit regularly.

Use a damp cloth to wipe the stainless steel exterior.

Let the unit stand upright for at least 2 hours before plugging it in to allow refrigerant to settle. viva water dispenser manual 8liech-sc-ssd

: Activate the blue switch at the back. Optimum performance is typically reached at 42°F (5.5°C) .

This manual outlines the setup, daily operation, deep cleaning procedures, and troubleshooting steps needed to keep your unit operating efficiently. 📋 Viva 8LIECH-SC-SSD Product Specifications

Open the bottom door. Clean the new bottle cap. Insert the probe into the bottle and slide it into the cabinet. If your dispenser isn't performing correctly, check these

3°C – 10°C (37.4°F – 50°F) via built-in "Ice Bank" cooling technology. Refrigerant Type: R-134A.

If these steps do not solve the issue, you can call the support line (often 1-855-594-4755 for Electrotemp products). Disclaimer

If you want, I can: produce a formatted PDF of this report, draft a short user quick-start sheet, or extract exact specs from the official manual (provide manual or allow me to search). Let the unit stand upright for at least

120V / 60Hz / 6.5 Amp alternating current (AC). Requires a grounded 3-prong outlet. Heating Power: 650 Watts.

Even with a well‑built dispenser like the Viva 8LIECH-SC-SSD, you may occasionally encounter minor issues. Below is a troubleshooting guide based directly on the Viva manual family.

The is a highly popular, technologically advanced bottom-loading water dispenser manufactured by Electrotemp Technologies. Known for its premium stainless steel construction, hidden bottle cabinet, and automated sanitization system, this unit eliminates the heavy lifting of traditional top-loading coolers.

If the unit was transported on its side, you must leave it standing upright and turned OFF for at least 4 hours before plugging it in to allow the compressor oils to settle.

Upon delivery, your Viva 8LIECH-SC-SSD water dispenser will arrive in a well‑padded box. Keep the packaging for storage or returns just in case.