At 74Wh, the PB-Y37 is well under the TSA and international airline limit of 100Wh. It is safe for carry-on luggage, but must never be placed in checked baggage.
Overload or short circuit protection triggered. Unplug devices and wait for the unit to reset. 5. Maintenance and Safety Warnings To extend the lifespan of your
: Used to fast-charge smartphones, tablets, and Quick Charge compatible devices up to 18W. Getting Started 1. Checking the Battery Level
To maintain battery health, charge the unit at least once every three months if not in use. Heat & Liquids: aukey pby37 manual
If charging two devices simultaneously, the total output is split, reducing individual port speeds. For maximum speed, charge one device at a time. The LEDs do not light up when the power button is pressed.
You can use either the USB-C port (for USB-PD fast charging on iPhones and newer Androids) or the USB-A port (for Quick Charge 3.0 compatible devices).
Connect your device (phone, accessories) to the USB-A port. At 74Wh, the PB-Y37 is well under the
To get started with your Aukey PBY37 earbuds, follow these simple steps:
The USB-C port can output up to 65W, which is enough to charge many USB-C laptops, including the MacBook Pro, Dell XPS, and more. Low-Current Mode (For Small Devices)
Charge the power bank at least once every 3 months to maintain overall battery health. Unplug devices and wait for the unit to reset
Yes, you can charge up to three devices simultaneously. However, charging multiple devices will reduce the charging speed to each device as the total 65W output is shared across all active ports.
This mode is designed for small electronics like fitness trackers or wireless earbuds (devices under 60mA). To activate it, press and hold the power button for approximately 2 seconds .
Do not connect both inputs simultaneously; the PB-Y37 will default to the first one detected.
Connect the other end to a 45W (or higher) Power Delivery wall charger.
original or certified cables to avoid damage to your devices or the power bank. Do not attempt to disassemble or modify the unit. 5. Troubleshooting Common Issues Potential Cause Power Bank not charging Cable is not connected properly or charger is faulty. Use a different USB-C cable and PD charger. Device not charging Power bank is empty or connection is loose. Recharge the Go to product viewer dialog for this item. . Check cable connection. Charging is slow Device does not support PD/QC or improper cable used. Use a USB-C to Lightning/USB-C cable for PD. LEDs flashing unexpectedly Low-current mode active or unit over-temperature. Reset by pressing button; let unit cool down. 6. Frequently Asked Questions (FAQ) Q: Can I take the Aukey PBY37 Go to product viewer dialog for this item.