This is the proprietary software shipped on the mini-CD bundled with the machine. It features a retro, functional industrial interface designed specifically to control the ALTEC PC410 temperature controller via a COM port. 2. PC410 Controller Software (Generic)
The is a legendary dark infrared BGA rework station favored by electronics repair technicians, hobbyists, and engineers alike . While its hardware offers robust heating elements and a solid chassis, unlocking its full potential depends entirely on its software. Managing temperature profiles via a PC allows for precise, repeatable soldering and desoldering of delicate components like Xbox APUs, PlayStation Cell processors, and laptop chipsets.
An often-overlooked step: confirm your thermocouple wiring is correct. If the polarity is reversed, the controller may show decreasing temperatures as the station heats up.
Connect the ACHI IR6500 to your PC via USB and power the machine on.
Before installing the software, you must ensure your computer can communicate with the rework station's USB/Serial interface. System Requirements achi ir6500 software
| Safety Measure | Key Actions | | :--- | :--- | | | Confirm the supply voltage matches 220V/50Hz. Regularly inspect cables for damage. | | Operational Safety | Never leave the station unattended while in use. Always use the emergency power switch. | | Maintenance | Always allow the machine to cool down completely before any cleaning or maintenance. |
Ensure the machine is turned on before launching the software. Check Device Manager to see if the COM port number shifted (this happens frequently if you plug the USB cable into a different port on your PC). 2. Temperature Reads 0°C or Disconnects Mid-Process
Unlike a printer or a computer peripheral, the IR6500 does not run a full operating system. Its “software” typically consists of:
Lets you save custom profiles for Lead (Pb) and Lead-Free (RoHS) solders. This is the proprietary software shipped on the
Areas for improvement
Drops the temperature safely to solidify the solder joints without stress. How to Create a Profile in the Software Click on Edit Profile or Curve Settings .
| Problem | Likely Cause | Solution | |---------|--------------|----------| | "Device not found" | Wrong COM port or driver not installed | Open Device Manager → Ports → Identify ACHI device → Set COM port in software settings | | Temperature reading erratic | Thermocouple loose or damaged | Check physical connection; replace thermocouple | | Profile not following curve | PID gains too aggressive | Run Auto-Tune function for that specific PCB | | Software crashes on start | Corrupted config file | Delete config.ini from installation folder and re-launch | | Can't save new profiles | Folder write permissions | Run software as Administrator |
Ensure your serial port communication settings (as shown in Device Manager) match the controller's settings. Users have reported success with the following configuration: PC410 Controller Software (Generic) The is a legendary
Click or Open Port . If successful, the software will display the current room temperature read by the machine’s thermocouple. Mastering Profile Management
: The software typically does not require separate drivers, but compatibility issues can arise with modern operating systems.
Compatibility issues with older software code frameworks.