comes with a beard
Keep the rear metal amplifier plate clear of curtains, walls, or tight enclosures to allow proper heat dissipation.
: Protect the internal circuitry from power surges by unplugging the unit during lightning or when it won't be used for a long time. Connectivity & Features
450W to 600W RMS (depending on the specific version, like the Subwoofer: 15-inch driver with a 65mm voice coil. Satellites:
Avoid exposing the rear heat sink or control panel to direct rain or moisture. alien pro vector 15 manual
Set your mixing console output meters to nominal levels (0dB).
Ensure the power cord is firmly seated in the wall outlet and the speaker’s IEC inlet. Blown main fuse.
Check if the safety key switch is turned to the "On" position. Ensure the emergency stop interlock plug is fully seated. Keep the rear metal amplifier plate clear of
Dedicated Treble and Bass controls to shape the room acoustics.
Upon opening the box, you should find:
Delivering 450W RMS (600W on the Advanced model), the system features a 15-inch subwoofer paired with satellite arrays. Connectivity: Includes Bluetooth, XLR combo inputs, and Satellites: Avoid exposing the rear heat sink or
Independent volume controls, master volume control. 5. Troubleshooting
If your speaker fails to perform as expected, review this structural troubleshooting table before contacting an authorized service technician. Probable Cause Corrective Action Power cable is disconnected or loose.
Accuracy & Tone
Raise the volume on your playback device to roughly 80%, then slowly turn up the Channel/Master knobs on the speaker to your desired listening level. Connecting a Wired Microphone Ensure the microphone power switch is turned off.