An object is blocking the line of sight between the front and rear heads.
"Manual" here does not mean hand-powered (like a tyre iron). It means the operator controls the hydraulic joystick or lever to move the tools, rather than an automatic programmed sequence.
The system will fire the CCD beams across fixed, known distances to calculate the sensor offset variables.
To help you get the exact information you need, could you clarify: corghi exact 60 manual
: The "EXACT W.A." software provides step-by-step guidance, making it accessible even for technicians with varying skill levels.
Re-run the alignment process and carefully execute the wheel runout steps. Check for worn suspension parts.
| Parameter | Value | |-----------|-------| | Model | Corghi Exact 60 | | Type | Manual / Hydraulic | | Max rim diameter | 26" (standard) / 60" (with extension) | | Max rim width | 26" | | Max tire weight | 1800 kg (4000 lbs) | | Clamping range (inside) | 14" – 26" | | Clamping range (outside) | 10" – 26" | | Bead breaker force | 2800 kg (6200 lbs) @ 180 bar | | Motor power | 1.5 kW (2 HP) | | Hydraulic oil capacity | 25 L (6.6 gal) ISO VG 46 | | Machine weight (net) | 620 kg (1367 lbs) | | Noise level (LpA) | < 78 dB(A) | An object is blocking the line of sight
Do you need help with a specific task, like , fixing a communication error , or navigating a particular software menu ? Share public link
Clean the rim edge of dirt and weights where the clamp claws attach. Center the clamp on the wheel hub.
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later. The system will fire the CCD beams across
The system requires a "run-out compensation" to calculate the position of the wheel axis. The Exact 60 supports manual spinning (lifting the wheels) or push-type, 2-point, or 3-point ROC methods. 3.4. Caster and King Pin (KPI) Measurement
Are you working with the version or the corded version?
: Attach the four CCD sensors to the wheels using the Corghi universal clamps.
The Exact 60 series is built on a robust architecture that prioritizes reliable data transmission and user-friendly software.
The alignment lift or pit must be level within from front to back and side to side.