Hpe Smart Array S100i Sr Gen10 Sw Raid Driver For Windows Server 2022 · Updated

The HPE Smart Array S100i SR Gen10 SW RAID driver is a software component that enables the configuration and management of RAID (Redundant Array of Independent Disks) settings on HPE ProLiant Gen10 servers running Windows Server 2022. This driver is specifically designed for the HPE Smart Array S100i SR Gen10 controller, which is a software-based RAID solution that provides a cost-effective and efficient way to manage storage.

User and expert reviews consistently highlight a performance bottleneck, particularly with write operations: Hewlett Packard Enterprise Community

Connect both your Windows Server 2022 installation media (USB/ISO via iLO Virtual Media) and the driver USB stick to the server. Boot into the Windows Server 2022 setup environment.

The Windows Server 2022 installation will now proceed as usual. Your server will reboot several times, and all storage operations will be handled correctly by the loaded driver.

: It is highly recommended to use the latest driver version (e.g., v1010.14.0.0 or later) available through the HPE Support Center to ensure stability on Windows Server 2022. The HPE Smart Array S100i SR Gen10 SW

Select the newly revealed drive allocation and proceed with the installation normally. 6. Post-Installation Best Practices

Run (after installing HPE SSACLI):

Now go forth, deploy your Gen10 server, and leave the "no drives found" error behind.

Look for the section labeled "Driver - Storage Controller" or "Driver - Smart Array." Boot into the Windows Server 2022 setup environment

Software RAID depends heavily on coordination between the controller firmware and the OS driver. Always update the server’s system ROM/BIOS and storage controller firmware alongside driver updates to prevent data corruption risks. Troubleshooting Common Issues

What (e.g., DL360, ML30) are you using?

Since the S100i lacks onboard intelligence, the operating system driver is not merely an enhancement—it is . The driver translates operating system I/O requests into commands the S100i chipset can understand. Without the driver, Windows Server 2022 sees the physical disks individually, not the RAID logical volume. For production environments, this defeats the purpose of redundancy and performance.

This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later. : It is highly recommended to use the

Before installing the OS, the controller must be set to RAID mode and an array must be created.

: Embedded SATA controller is completely disabled or locked out by an installed hardware RAID controller.

to function as a RAID controller, the server’s system utilities must be explicitly set to instead of standard SATA AHCI mode.