--- Xhorse Firmware Update Tool 2.0.1 For Mini-vci _hot_ Download -

If you need help resolving a specific error code or locating the right drivers for your OS version during setup, please share and the exact error message you see. Share public link

: Because firmware modification tools access deep USB register paths, some antivirus programs flag them as a false positive. Temporarily pause your real-time protection before downloading.

Ensure your cable uses the high-quality FTDI FT232RQ chip for best results.

Firmware is the internal software embedded directly onto the chip of your Mini-VCI cable. It acts as the translator between your vehicle’s Electronic Control Units (ECUs) and your computer's USB port.

: On 64-bit systems, the tool typically needs to be placed in C:\Program Files (x86)\XHorse Electronics\MVCI Driver for TOYOTA TIS\ .

Some users have reported that updating a cheap clone Mini VCI cable with the Xhorse firmware update tool can render it dead, especially if the device uses a counterfeit FTDI chip. If this occurs:

: For Mini-VCI and related drivers, Windows 7 or 10 is typically required. Older Mini-VCI units often specifically require a 32-bit system (Windows XP or 7) for optimal driver compatibility. How to Update Your Mini-VCI/Mini OBD Tool

Once updated via version 2.0.1, verify functionality by launching your diagnostic software: Open . Navigate to Setup > Techstream Configuration .

Execute the FTDI driver installer ( FTDI_Drivers_Setup.exe ) to install the virtual COM port architecture.

Ensure your operating system is fully updated.

A progress bar will appear. The update usually takes between 1 to 3 minutes.

The is a small but indispensable utility. It is the key to unlocking the full potential of your Xhorse diagnostic hardware. By following this guide, you can confidently maintain your Mini-VCI cable and other Xhorse tools, ensuring they remain compatible, stable, and feature-rich.