Smartpack2 Touch User Manual [portable] Today
: Displays real-time status icons for the system (AC Mains, Rectifiers, Battery, and Load). Green icons indicate normal operation, while yellow or red icons signal active alarms.
Contains the interactive display and serves as the primary user interface.
Note: Actual functions depend on your specific SmartPack2 Touch model (e.g., SmartPack2 Touch Compact vs. SmartPack2 Touch Pro with RFID login). Always refer to the original manufacturer’s manual for exact wiring diagrams and safety certifications.
The Eltek Smartpack2 Touch Go to product viewer dialog for this item. smartpack2 touch user manual
Navigate to > Alarms > Voltage Thresholds to define your system boundaries:
Facilitates data maps for industrial SCADA automation. 3. Battery Management and Charging Configurations
If you have questions about specific features, like or configuring battery tests , I can provide more detailed, step-by-step instructions. Smartpack2 Master Controller - User's Guide - STT Solutions : Displays real-time status icons for the system
| Parameter | Specification | | :--- | :--- | | | 4.4-inch Color LCD / Capacitive Touch / Resolution: 480 x RGB x 272 | | Ethernet Ports | 2 x 10/100 BASE-T (RJ45) | | USB Ports | 2 x USB Type-A (Host) for storage or peripherals | | Serial Ports | RS-232, RS-485 | | Power Consumption | Max: 5.4W / Typical: 2.4W | | Operating Temperature | -20°C to +70°C (-4°F to 158°F) | | Storage Temperature | -40°C to +85°C (-40°F to 185°F) | | Dimensions (W x H x D) | 174 x 78 x 41 mm (Cutout: 153 x 68 mm) | | Protection Rating | IP22 (Indoor Use) |
: Review historical data, including when alarms were triggered and cleared, to identify recurring site issues. 3. Operational Tasks
Inspect the battery bank with a thermal camera; check temperature sensor calibration. Note: Actual functions depend on your specific SmartPack2
Select the corresponding file from the on-screen file explorer.
You can map specific internal software alarms to physical dry contact relays: Navigate to .
Located at the front for firmware updates and configuration backups. Rear Terminal Connections