: Plug the output cable into the battery. The charger will automatically detect the battery type and voltage. Select Mode : Press the Mode button to choose from: Normal : Standard charging cycle for most applications. Opportunity : Used for partial recharges during breaks. Cold : Adjusts parameters for low-temperature environments.

Ensure the circuit breaker feeding the charger is rated correctly for the unit's maximum AC current draw. 4. Operating Instructions

The charger must be connected to an AC power source with a properly grounded outlet in accordance with local electrical codes.

: Check all cables for wear and ensure ventilation vents are not obstructed. The charger requires at least 200mm of clearance for proper cooling.

Ensure the source voltage matches the rating listed on the charger’s serial plate (e.g., 208V, 240V, or 480V three-phase power). Electrical wiring must comply with local and national electrical codes.

The charger will automatically detect the battery voltage and type. Start-up Test: The LEDs will indicate a self-test sequence.

Yellow/Amber LED: The battery is in the bulk charging phase.

: The charger stops automatically once the battery is full. Disconnect the output cable to return it to 🚦 LED Indicator Meanings The charger features 6 high-visibility LEDs to communicate status at a glance: Exide Technologies Main Charge (Orange) : Initial high-current charging phase. Second Step (Yellow) : The battery has reached approximately 80% charge. Finish (Green) : Charging is complete and the battery is ready for use. Auto Balance

The (often classified within the premium GNB 2100 high-frequency series) is an advanced, microprocessor-controlled industrial charging system designed for electric vehicles, automated guided vehicles (AGVs), cleaning machines, and pallet trucks. Utilizing high-frequency (HF) switching mode technology, this charger optimizes energy consumption, minimizes its carbon footprint, and extends the operational lifespan of traction and motive power batteries.

The charger must be installed in a well-ventilated, dry area, away from corrosive fumes.

Blow out internal dust with low-pressure clean, dry compressed air. Check the DC cables for wear.

button. The LCD will show progress, and LEDs will indicate the current status. Completion

| Specification | Details | | :--- | :--- | | | CMP | | Voltage | 24V | | Charging Power | 45A | | Electrical Connection | 220V | | Length | 430mm | | Width | 510mm | | Height | 660mm | | Key Applications | Pallet trucks, small to medium-sized industrial equipment |

Fault Code: F3 or "Charge Time Exceeded" (Max Timer Timeout)

Plug the forklift or battery pack connector firmly into the charger's DC cable socket. Do not plug in while the battery is under load.

Are you currently seeing a specific on the display?